教大家閥套如何設置？

在使用升降機的時候，會發現升降機的底部閥套會有一些粗糙的東西，可以預防在使用升降機的時候滑動，確保了操作人員的人身安全，下面濟南天銳升降機械的有關專家給大家介紹一下升降機閥套如何進行設置？

介紹閥套內設置了控制閥，升降機還設有回油裝置，回油路在回油機構與油缸之間，升降機的內外框架上下都分別通過軸承座和導軌板鏈接在底座和臺面架上，內外框架都跟銷軸相連，油缸分別鏈接內外框架，連個連桿都安裝在同步軸上，連桿跟油缸中間部分鏈接，閥套底面設有通孔，臺階孔與閥套之間形成有間隙，間隙即形成在閥套側壁與臺階孔側壁之間，間隙也可形成在閥套底部與臺階孔底部之間，閥套底部與臺階孔底部的間隙可以是通過開設導油槽實現，也可以通過在閥套底部設置粗糙表面實現。
Introduction valve lift kit manufacturers to set up a control valve, oil return device also features a lift back to the oil between oil return mechanism and cylinders, both inside and outside the framework of the lift up and down respectively by bearing and rail links in the base plate and table frame on the inner and outer frame related to the pin connected to the fuel tank inside and outside the framework of each link, even a link between the synchronized axis are installed, the middle part of the cylinder rod with links to the bottom surface of the sleeve has a through hole, stepped bore of the valve sleeve a gap is formed, i.e., a gap is formed between the valve housing side wall and the side wall of the stepped hole, a gap may be formed between the bottom of the valve sleeve and the bottom of the stepped hole, the bottom of the valve sleeve and the stepped hole at the bottom of the gap may be set up through the oil guide groove implemented either by providing a rough surface at the bottom of the valve sleeve to achieve.
　　
升降機的組織結構在一步一步的提升，根據用戶的習慣和需要，升降機廠家的技術不斷的改進、完善，升降機將會給我們帶來更多的方便。
Speaking lift lift manufacturers organizational structure in a step by step improvement, according to the habits and needs of users, manufacturers of lift technology continues to improve, improve, lifts will bring us more convenience.